Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Door Installation for Enterprise Homeowners
An entry door that sticks, a sliding patio door that has lost its glide, or a frame that no longer seals against wind and dust is a daily reminder that the opening needs attention. Door installation in Enterprise is what we do, and only that. Every technician on the job works on windows and doors, which is why we can tell you which product actually fits your wall depth, your exposure, and your budget instead of steering you toward whatever one brand we happen to push. Our technicians have up to 11 years of experience, we’re licensed and insured, and we start every project with a free written estimate so you know the scope before a single screw goes in. Call (877) 558-4821. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Front Door Replacement
Front Door Replacement is the swap of your main entry slab and, often, its frame and hardware, and it’s the exterior upgrade that changes both how your house looks from the street and how it feels inside. In Enterprise it comes up most often when a wood door has taken years of desert sun and started to warp at the top corner, or when the frame has shifted enough that the latch won’t catch without a shoulder into it. We install Therma-Tru entry systems and other lines from our eight-brand portfolio, sized and handed to your existing rough opening so the trim line stays clean. A typical front door replacement in Enterprise runs $1,200 to $4,500 installed, depending on door material, whether sidelites are included, and how much frame repair the opening needs. Every quote is free, itemized, and fixed once you approve it.
Fiberglass vs. Steel Entry Doors
Fiberglass holds its shape against heat and won’t dent like steel, which matters on a west-facing entry that takes full afternoon sun. Steel costs less up front but can show dings and needs repainting sooner. We’ll walk you through both on the estimate rather than pushing the one that’s on hand.
Hardware, Thresholds, and Seals
The slab is only half the door. We set the threshold, weatherstripping, and sill with the same care as the panel, because that’s where dust and summer heat actually get in. Choose your handle set and finish with us at the quote stage so nothing gets ordered twice.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Door Replacement
Door Replacement covers any door on the house that has reached the end of its service life, whether that’s a back door, a laundry room entry, a garage-to-house door, or a bedroom door that no longer closes true. The trigger is usually mechanical rather than cosmetic: the frame has racked, the slab has swollen or split, the hinges have torn out of soft wood, or the door simply can’t be made to seal anymore no matter how many times you adjust it. We work from eight brands – Therma-Tru for premium entry systems, Mr-Glass for glass-in-door designs, plus the wider portfolio – so the recommendation follows your opening, not our stock. Typical door replacement in Enterprise ranges from $450 to $2,000 installed per door, driven by material, size, and frame condition. We pull the old unit, check the rough opening for square, and set the new one to the same trim line wherever possible.
Interior Door Swaps
Interior replacements are simpler than exteriors because there’s no weather to fight, but the frame still has to be plumb or the door will swing open on its own. We check the jamb before we order the slab.
Reusing Existing Frames
When the frame is sound, a slab-only replacement saves money and keeps your existing casing untouched. When it isn’t, we say so on the estimate rather than discovering it mid-install.
Sliding Glass Door Replacement
Sliding Glass Door Replacement is the removal and reinstallation of the full patio door unit, frame and panels together, and it’s the right call when the track itself is worn, the frame is out of square, or the glass has failed. In Enterprise we see a lot of older sliders where the rollers have flattened and the panel drags, or where the seal between the panes has gone and the glass fogs on one side. We supply sliders through ES Windows and the rest of our lineup, in standard and wide spans, with the screen and locking hardware included in the spec. Sliding glass door replacement in Enterprise typically runs $1,800 to $5,500 installed, depending on width, glass package, and whether the opening needs reframing. Free estimate, written line by line.
Track and Roller Wear
Aluminum tracks collect grit over the years and the rollers wear into a flat spot, which is why the panel starts to catch halfway. If the frame is otherwise solid, that’s a repair conversation, not a replacement one.
Glass Options for Desert Exposure
A slider facing the afternoon sun benefits from a low-solar-gain glass package or an impact-rated line. We’ll show you the trade-off between heat control and cost on the quote.
Storm Door Installation
Storm Door Installation adds a secondary outer door over your entry, and it earns its keep here by taking the sun and wind load that would otherwise hit your main door, plus letting you open the house to a breeze without opening it to the yard. It’s a good fit if your entry faces west or south, if you want more daylight at the front, or if kids and pets are in and out all day. We fit storm doors to the existing frame, so the job is quick and the trim line stays intact. Storm door installation in Enterprise usually runs $350 to $1,200 installed, depending on whether it’s a basic self-storing model or a full-view glass unit. We’ll measure the opening on the estimate so the door arrives right the first time.
Self-Storing vs. Full-View Glass
Self-storing doors keep the screen and glass in the same frame, which is convenient. Full-view glass gives you more light and a cleaner look from the street. Both work; it comes down to how you use the door.
Closer and Chain Tension
A storm door that slams is a closer that’s set too light or a chain that’s out of adjustment. We set both on install so the door closes firmly without rattling the frame.
Sliding Glass Door Installation
Sliding Glass Door Installation is the fit-out of a new patio door into a new or enlarged opening, and it’s the right service when you’re adding a slider where there wasn’t one, widening an existing opening, or replacing a unit that was never sized correctly to begin with. That last case comes up in Enterprise more than you’d expect: a previous slider installed with too little shim support, which lets the frame sag over time and the panel drag. We handle the sizing, the shimming, and the flashing so the opening drains the way it should. Sliding glass door installation in Enterprise runs $2,000 to $6,000 installed, depending on span, glass, and whether framing changes are needed. We use ES Windows and our other lines to match the slider to the rest of the house.
Sizing the Rough Opening
A slider needs the rough opening measured at multiple points, not once, because walls are rarely perfectly square. We check top, middle, and bottom before ordering.
Flashing and Drainage
Water has to have somewhere to go. We flash the sill and set the threshold with a positive slope so any intrusion drains out, not in.
Door Repair
Door Repair is the fix-it path when the door itself is still sound but something around it isn’t, and it’s worth pricing before you assume replacement is the only option. The common calls in Enterprise are doors that won’t latch, doors that rub the frame at the top or bottom, hinges that have pulled loose from the jamb, weatherstripping that’s crumbled in the heat, and sliding panels that have jumped the track. We assess the whole opening, not just the symptom, because a latch that won’t catch is usually a frame that’s shifted, not a broken latch. Door repair in Enterprise generally runs $150 to $600 depending on what’s involved, and we’ll tell you honestly when a repair costs more than it’s worth. Estimates are free either way.
Sticking and Swelling
Wood doors swell and bind in humid months and shrink back later, which is why a door that sticks in spring may swing free by fall. We plane and reseal rather than force it.
Hinge and Strike Adjustments
A hinge screw that won’t hold usually means the jamb wood has stripped. We reset the hinge properly instead of oversizing the screw and hoping.
Exterior Door Installation
Exterior Door Installation is the installation of any door that separates the inside of your house from the outside, from a side entry to a utility door to a rear patio access, and it’s the category where sealing and weather resistance matter most. If your current exterior door lets in daylight around the edges, or you can feel the heat on a summer afternoon, the opening is failing somewhere. We install exterior doors through Therma-Tru and the rest of our eight brands, matched to the exposure of the wall they sit in. Exterior door installation in Enterprise typically runs $700 to $3,500 installed, depending on material, size, and frame condition. Every exterior we set gets a proper sill pan and weatherstripping so it performs like a new opening.

Weather Sealing at the Sill
The sill is where most exterior door failures start. We set a pan under the threshold so any water that gets past the door drains out instead of wicking into the subfloor.
Matching Existing Trim and Siding
We match the casing and trim profile to the rest of the house so the new door doesn’t read as a patch. That matters more than most homeowners expect on a front-facing elevation.
French Door Installation
French Door Installation is the fit-out of a paired hinged door unit, either swinging out to a patio or in to a room, and it’s the option for homeowners who want the opening to read as a feature rather than a hole in the wall. In Enterprise, French doors are popular on rear patios and off primary bedrooms where the goal is light and a clean swing. They need more swing clearance than a slider, so we check the layout and the header before we spec the unit. We install French doors through Therma-Tru and the wider portfolio, in hinged pairs and with fixed sidelites where the opening allows. French door installation in Enterprise usually runs $2,200 to $6,500 installed, depending on span, glass, and whether framing changes are needed. Free written estimate, fixed pricing.
Swing Direction and Clearance
Which way the doors swing depends on the room layout, the patio furniture, and the sun. We plan the swing on the estimate so it doesn’t surprise you at install.
Header and Frame Requirements
A wide French door opening carries more load at the header than a single door. We check the framing before we spec a wider unit so the wall stays sound.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We install and service doors through Therma-Tru, one of the most recognized names in door systems, and we know where their entry units earn their keep: the multi-point lock hardware, the fiberglass skins that hold their shape against sun, and the sill systems that take the abuse of a well-used front door. We also work with Mr-Glass for glass-in-door designs, a category that’s grown steadily as homeowners want more light at the entry, plus ES Windows for sliding door systems and the wider glass work.
Our eight-brand lineup includes PGT and CGI for high-performance and impact-rated product, ECO Window Systems for efficiency-focused builds, CWS, and ViewLux, which means we can match the door to your opening and the rest of your exterior rather than the other way around. Whether you have Therma-Tru, Mr-Glass, ES Windows, or any other make, we can help.
Signs You Need a Pro Right Now
- Daylight around the edges. If you can see light between the door and the frame, the weatherstripping has failed or the frame has shifted, and both mean heat and dust are getting in. A pro can tell which in a few minutes.
- The latch won’t catch without a shoulder. A door that has to be pushed hard to latch is almost always a frame that’s out of square, not a bad latch. Left alone, the problem spreads to the hinges.
- The slider drags or jumps the track. Worn rollers or a bent track can usually be fixed, but a panel that has come out of its track can drop and crack. Get it looked at before it does.
- Fogging between the panes. That’s a failed glass seal, and no amount of cleaning will fix it. The panel needs replacing, and it’s worth pricing the whole unit against a slab-only swap.
- Water staining at the threshold. Any sign of moisture inside at the sill means the exterior seal has failed. That’s the one warning sign you shouldn’t sit on, because the damage moves into the subfloor.
Our Process, Step by Step
- 1
Free on-site estimate. We measure the opening at multiple points, check the frame for square, and talk through how you use the door. You get a written, itemized quote with the brand and product we recommend and why.
- 2
Product selection. We match the door to your exposure, your budget, and the rest of the exterior. Because we carry eight brands, you’ll see two or three real options rather than one.
- 3
Ordering and scheduling. We confirm the spec, order the unit, and set a date that works for you. Fast dispatch from 7am to 7pm, Sunday through Friday.
- 4
Removal and installation. The old unit comes out, the rough opening is checked and corrected if needed, and the new door goes in with proper shimming, flashing, and weatherstripping. We protect the floor and the trim.
- 5
Final walkthrough and cleanup. We test the swing, the latch, the lock, and the seals with you before we leave, and we don’t call it done until the door operates the way it should.
How Much Does Door Installation Cost in Enterprise?
Door installation in Enterprise typically runs between $450 and $6,500 installed, and the spread is wide because the range covers everything from a single interior slab swap to a wide French or sliding patio unit with framing changes. A typical exterior single-door installation runs $700 to $3,500 depending on material, size, and frame condition. A typical sliding glass door replacement runs $1,800 to $5,500, and a front door replacement runs $1,200 to $4,500. French doors sit at the top of the range at $2,200 to $6,500, while storm doors come in at $350 to $1,200. Repair, when it’s the right call, is the value play at $150 to $600.
What affects the price most is material (fiberglass costs more than steel, wood more than both), size and configuration (sidelites and wide spans add cost), glass package (low-solar-gain and impact-rated glass add to the line), and frame condition. An opening that’s out of square or has rot at the sill needs carpentry time that a clean swap doesn’t, and we’ll show you that on the line-item estimate so there’s no surprise on install day.
The way to avoid overpaying is to get a written, itemized quote that separates product from labor from any repair work, and to compare like for like. A single-brand dealer will quote one product because it’s what they have. We quote two or three from our lineup so you can see the trade-off. Every estimate is free and the written price is what you pay, with no change orders unless you approve them.
Our Service Area Near Enterprise
We serve door installation across the Las Vegas Valley, including Enterprise, Spring Valley, Paradise, Summerlin, Winchester, Henderson, Whitney, Sunrise Manor, Las Vegas, North Las Vegas, Boulder City, and Sandy Valley. Drive times vary with traffic, but most of our service area is within a reasonable call-out window, and we schedule around your day rather than ours. If you’re in a neighboring community, reach out and we’ll confirm timing on the estimate. Learn more about Enterprise Windows & Doors and the wider Enterprise service area, or check Spring Valley and Paradise for nearby coverage.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Enterprise
Door installation is the fitting of a new door unit, slab and frame, into an existing or new opening in your home. It includes measuring the rough opening, checking it for square, setting the frame with proper shims, flashing the exterior, and installing the hardware and seals. When the frame is sound, we can often install a slab-only replacement and keep the existing trim.
Most single-door installations take a half day to a full day, depending on material and frame condition. A simple storm door or interior slab swap can be done in a few hours, while a wide sliding patio or French door unit may take a full day or run into a second if the opening needs framing work. We’ll give you a realistic window on the estimate, not a guess at the door.
Door installation in Enterprise typically runs $450 to $6,500 installed, with the low end covering a single interior or storm door and the high end covering a wide French or sliding unit with framing changes. Front door replacement runs $1,200 to $4,500, exterior doors $700 to $3,500, and sliding units $1,800 to $5,500. Repair, when it’s the right call, is $150 to $600. Call (877) 558-4821 for an exact quote; estimates are free.
Yes. We install and service Therma-Tru entry systems, Mr-Glass glass-in-door designs, ES Windows sliding units, and the wider eight-brand lineup that includes PGT, CGI, CWS, ECO Window Systems, and ViewLux. We work on existing doors of any of these makes, whether or not we supplied them. Call (877) 558-4821 to talk through your door.
Same-day service is often possible for repairs and simple installations, depending on schedule. We answer 24/7 by phone, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday; if a door fails on a Saturday, call and we’ll book you for Sunday. Call (877) 558-4821 to check availability for your address.
Warranty terms depend on the door brand and the specific install, and we put the terms in writing on the estimate so you know exactly what’s covered and for how long. Product coverage comes from the manufacturer, and our workmanship terms are written into the agreement. Ask us at the estimate and we’ll spell it out before you sign anything.
Clear the area on both sides of the door, take down blinds or curtains near the opening, and move any furniture or wall art that could be bumped. If a pet or child needs to be kept away from an open doorway, plan for that during the install. Otherwise, leave the rest to us: we bring the drop cloths and clean up when the job is done.
Schedule Your Door Installation Service in Enterprise Today
Ready to stop fighting your front door or sliding around a patio panel that won’t track? Call (877) 558-4821 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written, itemized quote, a brand recommendation that fits the opening, and a fixed price before we start. No-obligation estimate, no pressure.
Written by the team at Enterprise Windows & Doors.