Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Window Replacement for Enterprise Homeowners
If your windows are fogging between the panes, whistling on a windy afternoon, or letting the desert heat pour in through single-pane glass, replacement is usually the smarter spend over years of patching. We handle window replacement in Enterprise as a windows-and-doors specialist, not a general remodeler. Our technicians have up to 11 years of experience, and every conversation stays on the opening itself: glass, frame, seal, and fit. Because we carry eight brands from one counter, we can match the right window to your home instead of pushing the one product a single-brand dealer happens to have stacked in back. Call (877) 558-4821 to talk through what’s failing and what it’ll take to fix it right. We offer free estimates with written line-item quotes, and we can often arrange same-day visits for assessment.

Energy Efficient Windows
Energy Efficient Windows are built to hold conditioned air inside your home when the summer sun is working against you, and they matter most in Enterprise houses with older aluminum frames, single-pane glass, or sun-baked west-facing walls that radiate heat long after sunset. If your rooms run hot while the thermostat says otherwise, or you feel a draft near the frame on an otherwise still morning, that’s usually the glass and seal working against you. We install efficiency-focused lines through our ECO Window Systems partnership alongside PGT impact options, so you can weigh efficiency against storm protection in one visit rather than across three different showrooms. Typical window replacement in this market runs roughly $550 to $1,400 per opening for standard-size efficiency upgrades, depending on frame material, glass package, and whether the frame stays or gets rebuilt. The written estimate sets the final price, and free estimates mean you see the number before anything is ordered.
Low-E Glass and Frame Options
Low-E coatings cut the solar heat that pushes your cooling bill up, and the right frame material matters just as much for holding that gain in place. We walk you through vinyl, fiberglass, and aluminum-frame tradeoffs in plain terms, then let the product type follow your actual exposure. The right window for your home – not just the one we happen to stock.
When an Efficiency Upgrade Pays
If your current windows are more than a couple of decades old and still on original glass, or if you’re seeing condensation between panes, replacement usually makes more sense than chasing individual failures. Homes in newer Enterprise subdivisions with builder-grade windows are a common fit for this. A quick assessment tells you whether you’re looking at a repair or a full replacement.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Window Repair
Window Repair is the targeted fix for a window that’s still structurally sound but has a specific failing part – a broken balance, a stuck sash, a failed lock, or a seal that’s given up. It’s the right call when the frame and glass are intact and only one component has drifted. If you’re weighing repair against replacement, that’s the conversation we want to have first, because the wrong answer costs you money either way. We service every brand we install and plenty we don’t, and we’ll tell you honestly when a repair makes sense versus when patching is throwing good money after a dying unit. Typical window repair in Enterprise runs $150 to $450 per window, depending on the part and how deep the disassembly has to go. That range holds across balance replacement, lock and latch work, and hinge or operator fixes. Free estimates mean you see the number before any work begins, and the written estimate sets the final price.
Parts and Hardware Fixes
Balances, hinges, locks, and operators wear first because they take the most movement. Replacing a single hardware component often restores full function without touching the glass or frame. We carry access to hardware across our eight-brand lineup, which shortens the gap between diagnosis and fix.
When Repair Beats Replacement
If the frame is solid, the glass is clear, and only one part has failed, repair usually wins on cost and disruption. It’s also the right choice when you’re not ready to match a replacement to the rest of the home’s windows. We’ll say so plainly when that’s the case.
Window Replacement Company
Window Replacement Company is the category that covers the full-scope job: removal, disposal, new-unit install, seal, trim, and the final walkthrough that confirms every opening operates cleanly. You need one when the problems aren’t isolated to a single window, when frames have deteriorated, or when the whole-house look is being reset for curb appeal. Enterprise Windows & Doors stays focused on windows and doors only, which is why we can be brand-agnostic rather than loyal to whatever’s in inventory. Eight brands. One specialist. Zero guesswork. Typical whole-home window replacement in Enterprise runs $6,000 to $18,000 depending on the number of openings, product tier, and whether impact-rated lines are in scope. Per-window replacement runs $550 to $1,400 for standard sizes. Free estimates, written line-item quotes, and fixed pricing with no change orders once the scope is set. Our technicians have up to 11 years of experience across the brands in our lineup.
Why a Specialist Beats a Generalist
Window installation is a measurement, flashing, and seal discipline, and it doesn’t share an installer with roofing or siding work. Every technician and every conversation we have is about windows and doors. That focus is why our recommendations track your needs rather than a general contractor’s schedule.
Brand Breadth as a Buying Advantage
Most competitors carry one or two lines and steer every quote toward what’s on hand. We carry PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That spread lets us match product to project instead of the other way around.
Window Glass Replacement
Window Glass Replacement is the swap of the glass unit itself when the frame, sash, and hardware are all in good shape but the pane has failed. It’s the right move when you see fogging, condensation trapped between panes, a crack that hasn’t spread through the frame, or a clean break with no surrounding damage. This is usually the least disruptive option on the menu because the surrounding assembly stays in place. We measure the unit, order the matching glass, and reset it with a fresh seal so the failure doesn’t repeat. Typical window glass replacement in Enterprise runs $200 to $600 per unit, depending on glass package, size, and whether the unit is single or impact-rated. That range covers both insulated glass units and single-pane swaps. Free estimates mean you see the number before we order, and the written estimate sets the final price.
Insulated Glass Unit Swaps
When the fog sits between two panes, the seal on the unit has failed and the desiccant inside has given out. Replacing the IGU restores clarity and performance without touching the frame. It’s the most common glass-only job we handle.
Cracks and Impact Damage
A crack that originates from an edge or a corner tends to travel once the glass heats and cools. Impact-rated products from PGT and CGI are built for the kind of wind-driven debris an Enterprise storm can throw. When a pane does break, we assess whether the frame took stress before we order glass.
Window Sash Replacement
Window Sash Replacement is the swap of the movable portion of the window – the frame that holds the glass and travels in the tracks – while keeping the outer frame and opening in place. It’s the right fix when the sash has warped, the wood has softened, or repeated balance failures have taken a toll on the sash structure itself. You get a working window back without pulling the surrounding trim or disturbing interior finishes. We measure the existing sash carefully, since a replacement sash has to match the original opening within a small tolerance to run clean. Typical window sash replacement in Enterprise runs $300 to $750 per sash, depending on material and whether the sash is part of a single-hung, double-hung, or slider assembly. The written estimate sets the final price, and free estimates mean you see it first.
Single-Hung and Double-Hung Sashes
Double-hung sashes see the most wear because both panels travel independently. When one sash fails while the other is solid, replacing just the failed sash keeps cost down. That’s the kind of choice a full-replacement quote usually skips.
Sliding and Casement Sash Options
Sliders and casements have different travel hardware, so the sash swap has to match the mechanism, not just the opening. We check the operator and track condition before quoting so the new sash runs on a sound base. Getting that pairing right is the difference between a smooth glide and a rejection.
Window Glass Repair
Window Glass Repair is the category of smaller, targeted glass work: chip fills, seal repairs around the perimeter, and crack stabilization before a break can spread. It’s the right call when the glass hasn’t failed structurally yet and the surrounding frame and sash are intact. Getting a chip addressed early usually costs far less than waiting for it to become a full unit replacement. We assess whether the damage is repairable or whether replacement is the honest answer, and we tell you which one it is. Typical window glass repair in Enterprise runs $120 to $400 depending on the damage and access. That range covers chip fills, perimeter reseals, and safety-film application. Free estimates mean the number comes before any commitment, and the written estimate sets the final price.
Chips and Cracks Before They Spread
Small chips and edge cracks tend to travel once thermal cycling begins, which in the desert happens fast. A repair that stabilizes the crack early prevents the whole unit from needing replacement. It’s the least expensive fix on the service menu.
Safety Film and Perimeter Reseals
Safety film adds a layer of break resistance without changing the glass unit, and it’s often the right answer for glass near a door or a low sill. Perimeter reseals close the gap where air and moisture creep in. Both are quick and don’t disturb the frame.
Window Pane Replacement
Window Pane Replacement covers the glass-and-frame unit for a single opening, whether that’s a fixed pane, a picture window, or one panel in a larger assembly. It differs from glass replacement in that the surrounding unit comes with it, which matters when the frame has warped but the rest of the assembly is still sound. If you’ve got a single bad window in an otherwise healthy wall of them, this is the fix that keeps the look consistent. We measure and match the style so the replacement doesn’t stand out from its neighbors. Typical window pane replacement in Enterprise runs $250 to $850 per pane, depending on glass type, size, and whether impact-rated product is being matched to the existing set. Free estimates, written line-item quotes, and a written estimate that sets the final price.
Fixed, Picture, and Awning Panes
Fixed and picture panes deliver light and view with no moving parts, so failures are usually glass-related rather than hardware-related. Awning panes have an operator and hinge that can wear alongside the glass. We check both the glass and the mechanism before recommending the pane swap.

Matching Existing Window Styles
A pane that doesn’t match its neighbors looks wrong from the street, and Enterprise has plenty of streetscape where that matters. We measure the grid, the glass tone, and the framing profile so the replacement blends. That attention to match is what separates a clean swap from a patch job.
Window Seal Repair
Window Seal Repair restores the barrier that keeps outside air, dust, and moisture from moving past the window’s perimeter or between the glass and the frame. It’s the right fix when you feel drafts near the trim, see daylight through a gap, or notice condensation forming on the inside of the glass rather than between panes. Left alone, a failing seal lets the desert dust in and lets conditioned air wander out. We diagnose whether the failure is at the weatherstripping, the perimeter caulk line, or the unit seal, because each one has a different fix. Typical window seal repair in Enterprise runs $100 to $350 per window depending on the seal type and access. The written estimate sets the final price.
Weatherstripping and Interior Seals
Weatherstripping on a moving sash takes the most wear, and it’s often the first seal to give. Replacing it restores the air barrier without touching the frame or glass. It’s the kind of small repair that quietly saves money on cooling through the whole summer.
Perimeter Caulk and Exterior Sealing
The caulk line around the exterior perimeter is what keeps wind and moisture from working behind the frame. When it cracks, the failure tends to show up as water intrusion and lose insulation performance at the same time. Resealing is a modest job that protects a much larger investment.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service PGT and CGI impact-rated lines and know where they wear – the balances and hardware on impact assemblies see more load than standard units, so those are the first components that need attention. We work with ECO Window Systems for efficiency-focused homes and can match the right glass package when the frame and sash are still sound. We handle Mr-Glass units and glazing work where a targeted pane or glass replacement is the honest answer instead of a full unit swap. And we work with Therma-Tru on door systems, since window and door replacements often touch the same opening and the same trim work, and getting them done together keeps the exterior consistent.
What makes the brand spread useful is that it lets us match product to project rather than hand you a single-option quote. A home that needs impact protection gets a different recommendation than one that’s chasing cooling performance on a west-facing wall, and both are answers we can stand behind because we don’t have a single-brand inventory to move. Whether you have PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, or ViewLux – or any other make – we can help.
Signs You Need a Pro Right Now
- Fog between the panes. Fog that sits between two panes means the sealed glass unit has already failed. The desiccant inside can’t keep up, and no amount of cleaning fixes it. Left alone, the unit’s insulation performance drops and the fog thickens.
- Drafts near the frame. A draft you can feel with your hand near the frame is a seal or weatherstripping failure, not just a chilly morning. It’s the air you paid to cool, leaking out of your house. Resealing is far cheaper than replacing a whole assembly after water intrusion sets in.
- Glass cracks that keep growing. A crack at an edge or corner tends to travel as the pane heats and cools through a desert day. Once it reaches the frame, the whole unit usually has to go. Getting a repair early keeps the cost down and the window working.
- Sashes that stick or won’t stay open. A sash that drags, binds, or slams down is telling you the balance or hardware has worn. Continuing to force it can damage the sash itself, turning a hardware repair into a much bigger job. A quick assessment tells you whether the sash survives.
- Daylight around the trim. If you can see light where the trim meets the wall, the perimeter seal has opened up. That gap lets in wind-driven dust and moisture and undermines the insulation around the opening. It’s a small fix that protects a much larger one.
If any of these describe your windows, call (877) 558-4821. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our Process, Step by Step
- 1
Phone consultation and scheduling. We ask what’s failing and when you first noticed it, so the visit comes prepared. That conversation also tells you whether you’re looking at a repair or a replacement before anyone knocks on the door. We book the site visit around your day.
- 2
On-site assessment. We measure openings, check the frame and sash condition, and look at the seal, hardware, and glass as separate components. A hand-held moisture meter and a quick thermal check show whether a perimeter seal is letting air through. That diagnostic step is what keeps a quote honest.
- 3
Written line-item quote. Every line is priced – glass, frame, hardware, seal, labor – so you can see exactly what you’re paying for. We present repair and replacement options side by side when both are reasonable. Free estimates mean you see the number before any commitment.
- 4
Product selection. We match the recommendation to your performance need: impact-rated PGT or CGI for storm exposure, ECO Window Systems for efficiency, or a design-forward finish where curb appeal is the priority. The written estimate sets the final price, and no change orders follow once the scope is set.
- 5
Installation and walkthrough. Our technicians install, seal, trim, and then walk each opening with you to confirm smooth operation and clean sightlines. We hand off the care and finish details at that walkthrough. Anything that doesn’t feel right gets sorted before we’re done.
How Much Does Window Replacement Cost in Enterprise?
Window replacement in Enterprise typically runs $550 to $1,400 per opening for standard-size replacement, and $6,000 to $18,000 for a whole-home job. Those are estimated ranges, and the written estimate sets the final price once the scope is set. A typical glass-only replacement runs $200 to $600 per unit, while a sash swap runs $300 to $750. Seal repair comes in around $100 to $350 per window, and a targeted repair runs $150 to $450 depending on the failed part.
What affects the price: the number of openings (the biggest driver – a single failing window is a fix, a whole wall is a project), the frame material and whether the existing frame stays or is rebuilt, the glass package (single-pane, insulated, impact-rated), and any trim or interior finish work tied to the opening. Access matters too – a second-story window near steep terrain takes more care than a ground-floor slider, and that shows up in labor.
How to avoid overpaying: get a written line-item quote rather than a single lump-sum number, ask whether the frame is being kept or replaced, and ask whether the recommendation is driven by your performance need or by inventory. A brand-agnostic installer can justify the product choice against the exposure, not the stock.
What’s included in a free estimate: on-site measurement, frame and seal condition check, product options across the brand lineup, and a written line-item quote. No change orders once the scope is set. Call (877) 558-4821 to set one up.
Our Service Area Near Enterprise
Our work covers Enterprise and the surrounding valley, including Spring Valley, Paradise, Summerlin, Winchester, Henderson, and the Las Vegas metro. We also reach Whitney, Sunrise Manor, North Las Vegas, Boulder City, and Sandy Valley, all within a reasonable drive of an Enterprise appointment. The same day means different things in different parts of the valley – Summerlin streets and Boulder City are both reachable without much delay, while Sandy Valley takes a bit more planning. If you’re outside the immediate area, mention it when you call so we schedule honestly. If you’re in a neighboring city, we can also help with window replacement and window replacement in those areas.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Replacement in Enterprise
Window replacement is the removal of an existing window unit and the installation of a new one, including the frame, glass, seals, and hardware. It’s the full-scope fix when a window has failed structurally or when the whole-house look is being reset. It differs from glass-only replacement, which keeps the frame and swaps just the sealed unit. Our window replacement service covers both approaches depending on what your opening actually needs.
A single window replacement usually takes a few hours once the product is on site, and a whole-home job is typically spread over a day or more depending on the number of openings. Glass-only swaps and sash replacements are faster than full unit installs. The exact timeline comes with your written estimate, and we tell you up front if any step is waiting on an order.
Window replacement in Enterprise runs roughly $550 to $1,400 per opening for standard sizes, and $6,000 to $18,000 for a whole-home job. Glass-only replacement runs $200 to $600 per unit, and seal repair is $100 to $350 per window. The written estimate sets the final price, and it’ll never drift upward on a change order once the scope is set. Call (877) 558-4821 for an exact quote – estimates are free.
Yes – PGT is one of the eight brands we install and service. We handle PGT impact-rated product, including glass, hardware, and seal work on existing assemblies. We also service CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If you’re unsure of your window’s brand, we identify it during the on-site assessment.
Same-day appointments are often available, and we’re honest about timing when we book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day availability best fits repair and assessment calls; product-order replacements get scheduled around the order.
Warranty terms follow the specific product line, and we walk them through with you at the estimate so you know exactly what’s covered before anything is ordered. We don’t make our own coverage claims beyond what the product manufacturer supplies. Ask for the warranty detail on your quote – it belongs in writing.
Clear the interior space around each window so technicians have room to work, and move any breakables off the sills. If you’ve noticed drafts, fogging, or a sash that sticks, write down when it started – that detail helps the diagnosis. Let us know ahead of time about pets and parking access so the visit goes smoothly. Call (877) 558-4821 to confirm details before we arrive.
Schedule Your Window Replacement Service in Enterprise Today
If your windows are fogging, drafting, or showing their age, getting an honest assessment is the fastest way to know whether you’re looking at a repair or a replacement. Call (877) 558-4821 to set a free estimate with Enterprise Windows & Doors. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Expect a written line-item quote, fixed pricing with no change orders, eight brands to match against your actual need, and no obligation. The written estimate sets the final price, so the number you see is the number you pay.
Written by the team at Enterprise Windows & Doors.